How do Whole-House Water Filters Work?

One of the best ways to provide a comprehensive solution for clean water for your family is to install a whole-house water filter. Before you determine whether to purchase a whole house water filter, you need to know a little bit about how the basic filter works. You’ll need to figure out what type and size of the filter meets your family’s needs.

A whole-house water filter system provides clean water for the whole house instead of just the kitchen faucets where drinking water is drawn. The water purifier system becomes the point of entry for the water. These systems work to prevent contaminated water from being used in the home for drinking, cooking, washing clothes and dishes, and bathing.

A whole-house water filter and purification system tends to use a four-step process.

1. Pre-filtering is the first step of most whole-house water filters. Through this step, water entering the home is put through a pre-filter to remove larger particulates, impurities, and contaminants in your tap water. This step traps anything that is about five microns in size. This step is important to the rest of the process of whole-house water filters because it prevents clogging later in the process.
2. Chlorine removal is the next step in whole-house water filters. The filtered water from the first stage is then put through a process to remove any chlorine and other contaminants comparable to chlorine. This step is important in the process of making the water look and taste better. While chorine serves a valuable function at the public water processing level to neutralize biological water contamination, the smell and taste can make your drinking water unpleasant when you draw it from the tap.
3. Activated charcoal is a method of whole-house water filtering that can eliminate the rest of the impurities that were missed through the first two steps. This process will also improve the taste quality of the water. The EPA recommends an activated-charcoal water filtration system for your whole house to give you that extra edge of protection from a wide variety of contaminants that might come in your water. Since the EPA is the agency responsible for the safety of the public water supply for this country, that recommendation means something.
4. Waste removal is the last step in a whole-house water filter system, where the remaining contaminants that have been removed from the incoming water in the previous three steps are flushed away. If a whole-house filter system uses a reverse osmosis system, it will produce the most waste. Using systems that rely on UV light and activated charcoal will produce less waste into the water.

    It is clear that a whole-house water filter that utilizes the activated charcoal methodology is preferable to other water purification methods. Aquasana has an excellent selection of whole-house water filter systems and other methods for keeping your water safe and healthy and that can fit your needs and budget. By working with a quality water filtration expert like Aquasana, you can install a whole-house water filter system that will make your water safe, healthy, and delicious from the first day it is installed. It will keep on providing top-quality water filtration for your home for many years to come.

    Why Should I Consider Charcoal Water Filters?

    When you start researching the best kinds of home water-filtering systems, you will certainly hear a lot about charcoal water filters. Most of us think of charcoal as those little black bricks that we use to barbecue hamburgers and hot dogs in the summertime. It is true that the charcoal that is used to make campfires and for grills is the same substance that does a great job filtering water for human consumption. It’s a good idea to know more about how charcoal water filters work so you can make an informed decision before you invest in your own water filtration system.

    The heart of any home water-filtering system is the filter itself and that is where a charcoal water filter stands out. As you may know, charcoal itself is the outcome of a process of where wood and other organic matter is heated together in an oxygen-free system. A lot of things come out of this refining process, but charcoal is one of the most useful products of that burning and has a lot of diverse uses including water filters.

    Charcoal often has air pockets buried inside the hard black material. That combination is one reason charcoal is such a great medium for fires used to make those hamburgers. Along with how well charcoal burns, the characteristic that makes it so great in the form of a water filter is it traps gases and contaminants in any water that passes through the filter. Aquasana charcoal water filters take advantage of the natural ability of charcoal to trap unwanted contaminants to produce a superior filtering product.

    When a charcoal water filter is designed, the manufacturer generally uses a variation of the material called activated charcoal. Activated charcoal has been processed so it is even more porous than conventional charcoal. That additional processing makes activated charcoal very good at trapping unwanted substances that are in the water so they do not make it to your tap.

    Activated charcoal water filters can absorb a tremendous amount of substances and trap contaminants for quite some time before you should change the filter out. For example, just one cc of charcoal can trap 90 times that much water contaminants in a very small space. That makes an activated charcoal water filter a tremendously efficient water purification system for your home.

    Another quality of charcoal water filters that makes this design a good choice is that they do not filter out the natural minerals in your drinking water. We get a lot of minerals from drinking water that are essential to health. If a water filtration system were to remove those minerals, you would have to find ways to replace that source of nutrition or there could be negative health repercussion for you and your family. If you select a charcoal water filter design when you buy a home water processing system, you don’t have that issue to worry about. The health benefits are the primary reason that Aquasana supports charcoal water filter systems for the benefit of its customers.

    When shopping for a high-quality water purification system, you can have confidence if the styles or models you are considering use the charcoal water filter approach to water purity. It is a design of water purification that has been in use for quite some time and it has been proven time and time again to be reliable and healthy in keeping your water healthy for you and your family to drink.

    What is the Difference Between Water Filtration Methods and Water Purification Systems?

    One thing that can hold you back from finding out the best solution for contamination of your drinking water is learning the terms. There are a number of technologies used to take the contaminated water that is in the water reservoirs of your community and turn it into clean water again so it is suitable for consumption by your family. It may be easy to write off the water filtration industry as a sham when in fact, the best way to guarantee clean and healthy water for your family is to install a home water purification system such as those Aquasana has in stock. It helps to sort out what the differences are between what is being done at the water processing plant and what you will get when you invest in a water purification solution from Aquasana.

    Very often water filtration and water purification are terms that are easily confused or intermixed when talking about the same thing. The water processing facility for your community has some methods at their disposal for filtering the water that will come out of the faucets at your home. One water filtration approach that has been used in different ways is boiling the water.

    This is a method of water filtration that is recommended in a crisis situation where you must take contaminated water and filter it yourself. By boiling the water, you kill off most of the bacteria or other living things in that water that could make you sick. Then you can take the water as it cools and pour it through a cloth to filter out impurities before drinking it. The boiling method is not a good way to filter the huge amount of water that must be filtered by your city’s water processing plant because it is too costly, too much of the water is lost to evaporation, and the overhead of manning that kind of filtration system would be too difficult to handle with the limited resources they have.

    Instead of using boiling, most water processing facilities that cities have add chemicals to the water to kill off bacteria and other dangerous viruses and parasites that could be living in the water that they are providing to the community. This method is workable because it does kill dangerous microorganisms living in the water. The downside is that it is not 100% effective, so some water contamination still gets through. In addition, the chemicals that are added then become a form of water contamination as well.

    Water purification is one term that is used for many of the most effective home water processing systems such as those Aquasana can provide. Within that category of solutions for water contamination, there are a number of designs. A method that many have regarded as most effective uses activated charcoal filters to purify the water before it comes out of the water faucets of your home. An activated charcoal water purification system takes advantage of the ability of charcoal to trap odors, microorganisms, and chemical water contamination and only allows clean and healthy water to get through.

    It is no wonder that the activated charcoal water purification system is the water purification system that the Environmental Protection Agency of the federal government recommends for homeowners who wish to invest in a home water processing solution that they can count on. Aquasana has a variety of activated charcoal water purification systems that they can show to you to fit the home water processing solution you need to your budget and your need for clean water as well.

    Are There Bugs In Your Drinking Water?

    It’s summer time and it’s HOT! People are drinking more water and trying to stay cool. This sounds like a typical seasonal occurrence, but there are risks involved if you are drinking unfiltered tap water.

    Chlorine is a poison designed to kill living organisms like bacteria and virus. This is how the municipalities keep us safe from water borne disease outbreaks. It’s a necessary evil and it’s effective, but only to a point.

    Have you ever stopped to think about chlorine resistant organisms; Cysts, parasites… microscopic bugs?

    Two of the most common water born parasites are Cryptosporidium and Giardia. These are small protozoan which create a hard shell around themselves, which makes them resistant to chlorine. They come from animal feces in surface water and are much more common than we realize.

    These cysts are most dangerous to young children, the elderly and those with weakened immune systems. If infected by these parasites you typically suffer flu like or food poisoning symptoms. Symptoms usually last for 3 or 4 days, with some cases lasting weeks or months. The Center For Disease Control estimates that 50% of the time people are diagnosed with food poisoning or the flu, they have actually been infected with these chlorine resistant bugs found in drinking water.

    Here is the real story; EPA officials estimate 850 billion gallons of storm water mixed with raw sewage pour into U.S. waters every year. An additional 3 billion to 10 billion gallons of raw sewage spills accidentally every year from systems designed to carry only sewage. These spills are caused by improper connections, clogs caused by debris, construction accidents and cracks in aging pipes.

    Sewage commonly gets into drinking water supplies. Run off from fields and animal feed lots is where most water borne parasites originate. In 1993 more than 400,000 people got sick and more than 100 people died within a 4 week period after cryptosporidium contaminated drinking water in Milwaukee WI.

    An easy way to remove these parasites is with a sub-micron home drinking water filter. The parasites are large enough to catch because of the shell created to keep them alive, 3-5 microns in size. A quality water filtration system with an absolute micron rating of 1 micron or less is an easy, affordable solution. Drink parasite, cyst & bug free water with Aquasana Drinking Water Filters!

    « Previous Page

    CUSTOMER SERVICE

    Mon-Fri 8am-8pm CDT
    866-NO-BOTTLE
    866-662-6885
    Aquasana makes the Inc 500
    drinking water filters certified by NSF
    award winning Aquasana water filters
    Aquasana 90 day satisfaction guarantee
    find Aquasana on facebook
    follow Aquasana on twitter
    Aquasana's photostream on flickr
    Aquasana's YouTube channel
    Download our press kit
    Click here to download the PDF
    Aquasana Press Kit
    All about Water for Life
    Click here for more information
    Aquasana Water for Life auto-ship replacement program